I bought this saw for my husband because I felt he needed a lighter weight saw since he uses one quite a bit on the farm and he isn’t getting any younger. He immediately tried out the saw (he was used to a 21″ cutting bar) and loeved it. To use his words”That saw cut through those trees like butter. He used it to clear fallen trees off our 375 acre farm and to do the “gin” work around our home. We had a very bad ice storm last winter and had many down trees to saw up to be moved. He loves the power and how easy it starts. He said to rate this 5 stars at least!
husqvarna chainsaw 3120 xp starts, idles, runs good when cold after running 20-30 minutes it is hard Husqvarna Chainsaw Parts to start.?
also it will not idle after running 20-30 minutes.i clean or put a new plug in it every day an also clean air filter, is this a carb adjustment or could there be somthing else?
Powered by Yahoo! Answers
I bought this saw today in order to clear out a couple of trees that fell in a storm last night. I’ve never owned a chainsaw before and I am the first to admit that I know nothing about them. I had not read any reviews and only picked this one because of the price. I got home took it out of the box followed the quick setup instructions and started cutting. This saw did everything I could have hoped that it would do. My father-in-law, who has owned a few saws of his own, was also very impressed. Being the first time I’ve ever cute trees, I made a beginers mistake and got the chain bound in the process of getting out the chain was pulled loose. I can’t imagin having to use a tool to retighten the chain, this was so easy. It did seem to take a few more pulls to start than what I would have expected but nothing bad (maybe 12-15 pulls). All-in-all this is the best chainsaw I’ve ever owned, at least after my first day of use. Now I just need to find more trees to cut.
Can anyone help me with a chainsaw problem?
I have a Husqvarna 359 chainsaw. I had it for a few years. It worked fine, then within one tank of gas, I started having problems with it and by about half of a tank, the saw just quit. It’s acting like a fuel line leak. I choke the Husqvarna Chainsaw 359 Parts saw, it fires. I take off the choke, it starts, runs for about 2-3 seconds, it quits. I cleaned the carb (every thing is working like new, and yes I have the adjustment needles set properly). The carb’s diaphrahm is like new. I changed the fuel line and fuel filter. The air filter is clean. The fuel tank vent filter is still there. I even cleaned the piston rings (which were sticking). After all that, I still had the same problem.I took a small engine repair class and every engine I have touched works, but I am stumped with this saw.Any ideas?
Powered by Yahoo! Answers
Watch the video related to Husqvarna Chainsaw 359 Parts
I bought this saw for my husband because I felt he needed a lighter weight saw since he uses one quite a bit on the farm and he isn’t getting any younger. He immediately tried out the saw (he was used to a 21″ cutting bar) and loeved it. To use his words”That saw cut through those trees like butter. He used it to clear fallen trees off our 375 acre farm and to do the “gin” work around our home. We had a very bad ice storm last winter and had many down trees to saw up to be moved. He loves the power and how easy it starts. He said to rate this 5 stars at least!
husqvarna chainsaw 3120 xp starts, idles, runs good when cold after running 20-30 minutes it is hard Husqvarna Chainsaw Parts to start.?
also it will not idle after running 20-30 minutes.i clean or put a new plug in it every day an also clean air filter, is this a carb adjustment or could there be somthing else?
Powered by Yahoo! Answers
I bought this saw today in order to clear out a couple of trees that fell in a storm last night. I’ve never owned a chainsaw before and I am the first to admit that I know nothing about them. I had not read any reviews and only picked this one because of the price. I got home took it out of the box followed the quick setup instructions and started cutting. This saw did everything I could have hoped that it would do. My father-in-law, who has owned a few saws of his own, was also very impressed. Being the first time I’ve ever cute trees, I made a beginers mistake and got the chain bound in the process of getting out the chain was pulled loose. I can’t imagin having to use a tool to retighten the chain, this was so easy. It did seem to take a few more pulls to start than what I would have expected but nothing bad (maybe 12-15 pulls). All-in-all this is the best chainsaw I’ve ever owned, at least after my first day of use. Now I just need to find more trees to cut.
Husqvarna chainsaw trouble! Can you help?
I have been running a Husqvarna 345 chainsaw and for some reason it has been acting up. It is hitting a plateau on it’s speed Husqvarna Chainsaw Parts Stihl so when I try to cut – it’s bogging down and stopping. I replaced the chain. Put in brand new gas. Cleaned the filter (gas and carb). I don’t know what else I can do. It just won’t accelerate. When I give it a burst of fuel with the primer button it jumps up to prime cutting speed, only to drop back down and stop cutting. Any advice?
Powered by Yahoo! Answers
Husqvarna Chainsaw Parts Stihl
I use this in my NH home on trees which I clear for expanding my daylily farm. I looked through the many options and bought this due to the reviews and the reputation of the company. But beware.It took seven hours of trying and five days to get it started the first time. I even called the manufacturer’s hot line which was helpful but they said to me that this was a common problem.First a suggestion. Follow the directions but beware the flooding. Follow each step but you may have to do what I was told to do several times.Remove the cowling and remove the spark plug and turn the engine over to expel the excess fuel. Then clean the plug and let it dry. It may take time since the fuel mix with oil does not evaporate quickly, the oil is a surfactant and stays on the plug. Let the engine cool down then replace the plug, and start all over again. It took three times to get it to finally turn over. It finally turned over.It cuts well and seems to start well after the first almost impossible
What’s the difference between these chainsaws- Husqvarna Chainsaws Parts Chainsaw Chain craftsman, poulan or husqvarna?
Even though they are all made by husqvarna.
Powered by Yahoo! Answers
Watch the video related to Husqvarna Chainsaws Parts Chainsaw Chain
Written by 
Stihl Chainsaws & Used Chainsaw Source
What Can You Do With Bad Credit?
More Source About Clutch Sprocket Assy
More Titles For McCulloch Chainsaw Gas Tank
Chainsaw Accessories
Essential Guideline On Homelite Chainsaw Ads
Advice Blog On Husqvarna Chainsaw Filters
Compelling Tips On Stihl Chainsaw Ipl
Free Connected Tips For Handle Stihl
Award Winning Websites On Husky Chainsaw
Free Efficient Guidepost For Homelite Chainsaw Spares
Read Here To Learn More About Jonsered Chainsaw
Free Relevant Roadmap For Stihl Chainsaw Oilers
Hot Tips On Poulan Chainsaw P4018wt Parts
Essential Roadmap On Homelite Chainsaw Super Xl
Helpful Truths On Cover Nos
Free Inviting Article On Stilh Chainsaw
Free Inviting Tips On Bearing Homelite
Read Here To Learn More About Stihl Chainsaws
Free Connected Guidepost For Stihl Chainsaw Tachometer
Free Supportive Facts On Chainsaw Carving
Free Efficient Data On Husqvarna Chainsaw
Are You Looking For Information About Used Digital
Why You Should Buy Top Cylinder Cover
Award Winning Websites On Order Poulan Chainsaw Parts Online
Free Indicative Info On John Deere Chainsaw Fuel Ratio
Secrets Blog On Husqvarna Chainsaw User Comments