I bought this saw for my husband because I felt he needed a lighter weight saw since he uses one quite a bit on the farm and he isn’t getting any younger. He immediately tried out the saw (he was used to a 21″ cutting bar) and loeved it. To use his words”That saw cut through those trees like butter. He used it to clear fallen trees off our 375 acre farm and to do the “gin” work around our home. We had a very bad ice storm last winter and had many down trees to saw up to be moved. He loves the power and how easy it starts. He said to rate this 5 stars at least!
Can anyone help me with a chainsaw problem?
I have a Husqvarna 359 chainsaw. I had it for a few years. It worked fine, then within one tank of gas, I started having problems with it and by about half of a tank, the saw just quit. It’s acting like a fuel line leak. I choke the Husqvarna Chainsaw Gas Tank saw, it fires. I take off the choke, it starts, runs for about 2-3 seconds, it quits. I cleaned the carb (every thing is working like new, and yes I have the adjustment needles set properly). The carb’s diaphrahm is like new. I changed the fuel line and fuel filter. The air filter is clean. The fuel tank vent filter is still there. I even cleaned the piston rings (which were sticking). After all that, I still had the same problem.I took a small engine repair class and every engine I have touched works, but I am stumped with this saw.Any ideas?
Powered by Yahoo! Answers

Google Videos - Husqvarna Chainsaw Gas Tank
Search results for query: [Husqvarna Chainsaw Gas Tank]
Stihl MS 250 my lil wood cutter (in HD)

2-cycle two-cycle Sthil bar pre-mix mixed gas engine start tank cold starting 100:1 50:1 Two "Two-stroke Engine" Gas outdoor sports high ...
youtube.com
Poulan (Farmhand 2500)

This video goes over some of the features that the older Poulan and Husqvarna saws used. This farm hand is about 15+ years old. I'm going by ...
youtube.com
I use this in my NH home on trees which I clear for expanding my daylily farm. I looked through the many options and bought this due to the reviews and the reputation of the company. But beware.It took seven hours of trying and five days to get it started the first time. I even called the manufacturer’s hot line which was helpful but they said to me that this was a common problem.First a suggestion. Follow the directions but beware the flooding. Follow each step but you may have to do what I was told to do several times.Remove the cowling and remove the spark plug and turn the engine over to expel the excess fuel. Then clean the plug and let it dry. It may take time since the fuel mix with oil does not evaporate quickly, the oil is a surfactant and stays on the plug. Let the engine cool down then replace the plug, and start all over again. It took three times to get it to finally turn over. It finally turned over.It cuts well and seems to start well after the first almost impossible
This is an excellent saw for light duty work, I use it for tending to apple and pear trees and the occasional cleanup after a storm. It is big enough for light firewood tasks, but is underpowered for large hardwood pieces. The first thing you should do is buy a Stihl chain for it as the factory Oregon (who makes the husky chains) is a skip link design, featuring fewer cutting teeth and dulls quickly.
In the event that you do remove the side covere with the brake on, which is comparatively difficult, you can make a three prong socket to reset the tension spring. This works much better than chasing a spring around the shop. Your local Husqvarna dealer has a reset tool that they can show you. Lowes might sell Husqvarna, but until they have a parts counter they are not a dealer in my opinion.
chainsaw trouble?
chainsaw starts but quits when i Husqvarna Chainsaw Filters give it throttle its a husqvarna model 55 rancher could it be the fuel filter or a dirty carburetor?
Powered by Yahoo! Answers
Husqvarna Chainsaw Filters
I bought this saw today in order to clear out a couple of trees that fell in a storm last night. I’ve never owned a chainsaw before and I am the first to admit that I know nothing about them. I had not read any reviews and only picked this one because of the price. I got home took it out of the box followed the quick setup instructions and started cutting. This saw did everything I could have hoped that it would do. My father-in-law, who has owned a few saws of his own, was also very impressed. Being the first time I’ve ever cute trees, I made a beginers mistake and got the chain bound in the process of getting out the chain was pulled loose. I can’t imagin having to use a tool to retighten the chain, this was so easy. It did seem to take a few more pulls to start than what I would have expected but nothing bad (maybe 12-15 pulls). All-in-all this is the best chainsaw I’ve ever owned, at least after my first day of use. Now I just need to find more trees to cut.
What is wrong with my chainsaw? I have a husqvarna 455 rancher. Husqvarna Chainsaw When I squeeze the throttle to full the engine?
When I squeeze the throttle to full, the engine bogs down and dies.
Powered by Yahoo! Answers
Related External Links
I’m a casual user and for around the house after the storms its made cleanup a breeze. Compared to similar makes my friends have its by far the best, but I won’t tell them that. Observations are it’s a little heavy and I was lead to believe it had the quick chain tensioning feature which it did not.
Can I put a before 2006 chain and bar on my 2007 husqvarna 142 chainsaw?
it’s a 16 inch saw. When I go to buy a new chain the package says for models before 2006 on all that they have.
Powered by Yahoo! Answers

Google Videos - Husqvarna Chainsaw User Comments
Search results for query: [Husqvarna Chainsaw User Comments]
- (all)

Husqvarna has one of the worlds widest range of chainsaws made for every need and condition, around the world. For professionals as well as ...
youtube.com
455 Rancher Review

Husqvarna 455 Rancher Chainsaw Review $400 for the saw and $40 for the box
youtube.com